INFORMATION FOR. INTERLINE Colour. Gloss Level. Volume Solids. Typical Thickness. Theoretical Coverage. Practical Coverage. Method of Application. PRODUCT DESCRIPTION. A two pack epoxy holding primer. Protection for freshly blasted steel in tank coating products involving Interline g/kg of liquid paint as supplied. EU Solvent Emissions Directive (Council. Directive /13/EC). Interline Epoxy Tank Holding Primer.
|Published (Last):||3 March 2008|
|PDF File Size:||7.42 Mb|
|ePub File Size:||8.68 Mb|
|Price:||Free* [*Free Regsitration Required]|
Consult your International Paint representative for the system best suited for the surfaces to be protected. Material is supplied in 2 containers as a unit. Consult interlibe International Paint representative for details.
Multiple coats may be required to achieve specified film thickness. Products Marine Coatings Marine chemicals Marine lubricants. These may be subject to variation depending on factors such as differences in colour and normal manufacturing tolerances.
Subject to re-inspection thereafter. Actual safety measures are dependant on application methods and work environment. Test performance results were obtained in a controlled laboratory environment and International Paint makes no claim that the exhibited published test results, or any other tests, accurately represent results found in all field environments.
Interline | Litnobiles
All surfaces to be coated should be clean, dry and free from contamination. Read and follow all precautionary notices on the Material Safety Data Sheet and container labels. Unmixed material in closed containers should be maintained in protected interlinne in accordance with information given in the STORAGE Section of this data sheet.
Use International GTA only in exceptional circumstances. Recommended Tip Range 0.
Apply in good interlije. Allows for more flexible working procedures whilst not detracting from the chemical resistance of the completed coating scheme. Proper ventilation and protective measures must be provided during application and drying to keep solvent vapour concentrations within safe limits and to protect against toxic or oxygen deficient hazards.
Application by brush is recommended for small areas only. Petersburg, Russia, phone: High pressure fresh water wash or fresh water wash, as appropriate, and remove all oil or grease, soluble contaminants and other foreign matter in accordance with SSPC-SP1 interlinee cleaning.
Store in dry, shaded conditions away from sources of heat and ignition.
If you do not fully understand these warnings and instructions or if you can not strictly comply with them, do not use this product. It is good working practice to periodically flush out spray equipment during the course of the working day.
Overcoating information is given for guidance only and is subject to regional variation depending upon local climate and environmental conditions. Consult your local International Paint representative for specific recommendations.
Clean all equipment immediately after use with International GTA Frequency of cleaning will depend upon amount sprayed, temperature, relative humidity and elapsed time, including knterline delays.
Take precautions to avoid skin and eye contact ie.
In the event welding or flame cutting is performed on metal coated with this product, dust and fumes will be emitted which will require the use of appropriate personal protective equipment and adequate local exhaust ventilation. A two pack epoxy holding primer.
Do not allow material to remain in hoses, gun or spray equipment. The history and age of the steel and the method of working can have a significant effect on the paint consumption. VOC values are typical and are provided for guidance purposes only.
Marine Coatings Marine chemicals Marine lubricants. DO NOT thin more than allowed by local environmental legislation.