Consult International Marine’s INTERGARD brochure on NauticExpo. Page: 1/4. International Intergard is a high build, two component epoxy, pigmented with lamellar micaceous iron oxide for enhanced corrosion resistance and. Intergard is a two-pack epoxy coating, containing micaceous iron oxide, which can be overcoated after extended periods. Used as a.
|Published (Last):||13 April 2011|
|PDF File Size:||2.51 Mb|
|ePub File Size:||18.75 Mb|
|Price:||Free* [*Free Regsitration Required]|
Apply in good weather.
View Contact Call Seller Now. High pressure fresh water intergqrd or fresh water wash, as appropriate, and remove all oil or grease, soluble contaminants and other foreign matter in accordance with SSPC-SP1 solvent cleaning.
Application by roller is recommended for small areas only. Typical Coverage per coat 5. Thoroughly flush all equipment with International GTA Intact shop primers must be clean, dry and free from soluble salts and any other kntergard contaminants.
Nature of Business Authorized Wholesale Dealer. Light Grey Part A Download. VOC values are typical and are provided for guidance purposes only. This product is no longer in stock. The incorporation of plate-like micaceous iron oxide pigment both increases the barrier effect intergafd long Technical and application data herein is for the purpose of establishing a general guideline of the coating application procedures.
International Intergard – Rawlins Paints
These may be subject to variation depending on factors such as differences in color and normal manufacturing tolerances. Consult your local International Paint representative for specific recommendations. Suitable for use in both new construction and industrial maintenance situations.
Use International GTA only in exceptional circumstances. Actual safety measures are dependant on application methods and work environment. DO NOT thin more than allowed by local 40 legislation.
INTERGARD – International Marine – PDF Catalogs | Documentation | Boating Brochures
Suitable for use in both new construction and industrial maintenance situations. In the event welding or flame cutting is performed on metal coated with this product, dust and fumes will be emitted which will require the use imtergard appropriate personal protective equipment and adequate local exhaust ventilation.
Prior to use, obtain, consult and follow the Material Safety Data Sheet for this product concerning health and safety information. If you do not fully understand these warnings and instructions or if you can not strictly comply with them, do not use this product.
International Intergard is a high build, two component epoxy, pigmented with lamellar micaceous iron oxide for enhanced corrosion resistance and improved overcoating properties after ageing.
Optimum performance is achieved when Intergard is applied over blasted steel. Typical Coverage per coat.
It is good working practice to periodically flush out spray equipment during the course of the working day. Ideally suited as a damage and handling resistant coating which can intergarx factory applied and thenovercoated on site with minimum surface preparation. For maximum performance ambient curing temperature should be Optimum performance is achieved when Intergard is applied over blasted steel.
Do not exceed pot life limitations. Epoxy Coatings in Mumbai.
Do not allow material to remain in hoses, gun or spray equipment. Test performance results were obtained in a controlled laboratory environment and International Paint makes no claim that the exhibited published test results, or any other tests, accurately represent results found in all field environments.
International International Intergard is a high build, two component epoxy, pigmented with lamellar micaceous inetrgard oxide for enhanced corrosion resistance and improved overcoating properties after ageing.