WCDMA RAN Systems and Site Introduction. RBS components. WCDMA RBS Maintenance. 2. Customer Product Information (CPI) and. TXO Systems has the ERICSSON RBS RRUS 12 B3 in stock, along with a wide range of used and refurbished telecommunications equipment from all. Ericsson shall have no liability for any error or damage of any kind resulting from The support system for the RBS main unit is available in two variants.
|Published (Last):||13 November 2008|
|PDF File Size:||2.8 Mb|
|ePub File Size:||14.43 Mb|
|Price:||Free* [*Free Regsitration Required]|
Make Offer – Loading Damage to components mounted on printed board assemblies can occur if an ESD wrist strap is not used.
Strip off 12 mm of each wire using the cable shield cutter. Minimum monthly payments are required. Add to watch list. The minimum allowed bending 6061 for the optical cable provided by Ericsson is 40 mm and the minimum allowed bending radius for each individual fiber is 15 mm. No part of this document may be reproduced in any form without the written permission of the copyright owner.
Do not twist the fiber to the minimum bending radius. You are free to manage this via your browser settings at any time. To power up the RBS: Information related to a specific variant is included when necessary.
The TCU is installed in the slot 2 in the main reicsson.
Report any faults according to local requirements. Examine the packaging for damage. Support system variant 2 supports all DUW versions. To connect the optical cable to the bidirectional transceiver SFP, do the following: Insert the power cable wires into each erocsson tension clamp connection and check that they are properly fastened. Learn More – opens in a new window or 6061. Clean the site and remove objects such as wrapping paper and cable clippings.
Ericsson RBS 6601 LTE Indoor Main Unit Remote Base Station 1/bfl 901 009/4
Connect the DC power cable to the power supply terminals. Use the checklist in Table 6 to recycle and sort waste. To prepare for an expansion with a secondary support system, reserve space close to this main unit. Make sure that the room climate is within the RBS wricsson environment. Mouse over to Zoom – Click to enlarge. To install a TCU in slot 2 ericssom the main unit: If you are installing a front cover with the main unit, see Section 6.
Place the main unit in the rack. Get the item you ordered or get your money back.
Ericsson RBS LTE Indoor Main Unit Remote Base Station 1/bfl /4 | eBay
Subject to credit approval. Do not tighten the cable straps too tight. Leave the protective cap on the inactive fiber marked with yellow. This includes connections to the support systems’ built-in external alarm rbe and to an optional Support Alarm Unit SAU. Lock all doors and gates to the site. The cable connections depend on the transmission alternative chosen for the specific site.
Place the front cover on the railings and push ericdson front cover until it snaps in its place.
BTS FOR ERICSSON RBS – BFL /1 R3A – DUW 20 01 – KDU /2 R3B | eBay
If the fans are inaccessible from the back of the rack, the replacement of the fans requires that the main unit is removed from the rack. Electrical details of the alarm connector can be found in RBS Description.
Unpack the main unit. Fill in the verification checklist in Site Installation Documentation. Check if the main unit has the standard brackets installed for inch rack. Interest will be charged to your account from the purchase date if the balance is not paid in full within 6 months. A minimum free space of 50 mm in front of the main unit is required for cables and air intake. Carefully observe the polarity of the cable installation.
Reinsert and tighten the hexagon screw to a torque of 15 Nm using a torque wrench and a 13 mm socket. All our products are screened and re-packed in new, unbranded ESD packaging, ensuring eficsson reach you in the best possible condition. The item you’ve selected was not added to your cart.
6061 the rack is equipped with a door, measure the ericssson between the front of the main unit and the door.