This is the eleventh edition of CSA B, Propane storage and handling code. The remaining sections 8 to 14 of CAN/CGA-B became CSA B, Propane Storage and Handling Code. CAN/CSA B Electrofusion-Type Polyethylene Fittings for Gas Services. CAN/CSA-B Propane storage and handling code. CAN/CSA-B Code for the field. the purpose of equalization of vapour pressure does not require an a) Clause of CSA B limit Container Refill Centres to an.
|Published (Last):||19 September 2006|
|PDF File Size:||17.17 Mb|
|ePub File Size:||16.66 Mb|
|Price:||Free* [*Free Regsitration Required]|
As per Section 6. Propane Use Propane is an economical, easily obtainable, cost-effective fuel. Skip to content Ontario. Installation Requirements The installation of equipment that uses propane shall be in accordance with the Natural Gas and Propane Installation Code, B Agencies, Boards and Commissions.
The use of Carbon Monoxide Monitors set to alarm at 25ppm is based on the worker exposure limit in Reg. As per Section 4.
Clarification of regulation and code requirements for compliance to installation requirements, installer certification, and quality of work performed Propane Used Sca-b149.2-05 Special Effects A cylinder of up to lb capacity may be used for special effect appliances on production sites not open to the public.
It may be used to provide heat, light or generate electricity. Based on perceived need and accepted safety parameters. June Content last reviewed: Cylinder use as per Section 6.
Cea-b149.2-05 equipment shall be installed by trained certificate holders with sufficient clearances from combustibles, combustion and ventilation air and with dan of combustion being vented to the outdoors. This means that where an installation requires that the fuel be piped to the appliance, or that the product of combustion fumes be vented to the outdoors, the installation shall be done by a qualified technician. Cylinder storage limitation as per Section 6. Indirect fired, forced air heaters may be used, as long as the propane source is installed outside and properly piped in to the appliance.
CAN/CSA-B | Standards Council of Canada – Conseil canadien des normes
Supplemental Heating Appliances bearing certification as Construction Heaters must not be installed inside any work or gathering area where members of the production staff or visitors may congregate. The user must ensure that the CO monitors are capable of providing a warning if the carbon monoxide level exceeds 25 ppm.
The appliance must be vented to the outside and the operator must ensure that the product of combustion fumes is not re-circulated into the building or tent. The installation of equipment that uses propane shall be in accordance with the Natural Gas and Propane Installation Code, B Special effect appliances utilizing propane must be properly constructed using certified components, and must be under the control and close supervision of a Certified Technician when in use.
Propane Storage Propane cylinders not in use must be stored outdoors in secure, well ventilated storage.
Clarification of regulation and code requirements for compliance to installation requirements, installer certification, and quality of work performed. Propane is an economical, easily obtainable, cost-effective fuel.
Standards Council of Canada
If the CO levels exceed 25 ppm the user must take immediate action to protect workers and the public from further exposure. The equipment shall be installed in accordance with its installation instructions and the Code. No more than three 3 spare cylinders may be stored inside.
However, propane is also an extremely flammable fuel with physical characteristics which, if the fuel or its equipment is misused, can result in deadly consequences.